T-Bar Kit

Details

Weld Together T-bar Kit

This kit is all the parts you need to make your own 1" dia. set of t-bars. Simply trim the precoped uprights to your desired length weld in the threaded riser spuds and weld on the cross bar to your desired angle. The upper bar is made 32" long and is not dimpled so you can trim them down to your desired width.
• prebent 1" x .120 wall mild steel tubing 32" wide
• 2 pre coped uprights 11" long
• 2 weld in bungs tapped to accept 1/2" fine thread hardware

Email to a Friend