Build to Order One Piece Lower Riser
Posted by JK on 18th Aug 2016
Really dig these risers .. The one piece construction is much more solid than standard risers .. Easy to get straight and with steel bushings they don't budge at all. Internal wire cutouts were just right and easy to work with. I'd reccomend these one piece risers to anyone who is using a riser set up, night and day difference over drag spec, and much less $ than many other US made risers.
- These are our one piece lower risers. They work with the stock upper riser clamp used on most Harley models. Because they work with the stock upper clamp, tachs and speedo; mounting is simple with the use of the factory speedo or tach brackets. Multiple heights are available as well as the option to have them drilled for internal wire. Made from steel and a one piece lower clamp section to reduce the twisting usually seen with taller risers.
- Made of mild steel
- Tapped to accept 1/2 x 13 bolts on bottom side
- Accepts factory upper clamp and 1" diameter handlebar
- Available in custom sizes; if needed
- Internal wire available
- Pull back or pull forward available
- Allow 1-2 weeks for delivery for powdercoated or 4 weeks for chrome
- Does not include upper clamp
- Does not work with factory Dyna S upper clamp
- Sold Each
YOU MIGHT LIKE THESE