Sportster Highway Peg Crash Bar

Roll over to magnify and click to enlarge
  • sprotster highway peg crash bar frame sider
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11

Product Reviews

Write Review

  1. Perfectly engineered

    Posted by the_dean on 8th Apr 2017

    These fit my 2017 Sportster perfectly. They keep the bike looking sleek, and function exactly how you'd expect. One thing to keep in mind - HD mounts wire clips on each side of the lower-front frame area. These clips mount to the two holes on each side, which will need to be used for the highway bars. I just removed the clips and put a few zip ties in place. That is the only thing I ran into, and it took about two minutes to work around. I can't recommend these enough!

$299.00
Brand:
SKU:
HPCBSP

Product Description

This is a dual function part for those of you that have rubbermount Harley Sportster (2004 and up) with mid controls. Also available for the 2003 and earlier models but does require welding on the 4 supplied coped bungs to the frame.  The fully TIG welded assembly takes place of your bolt on highway pegs and serves the function as a standard highway peg would. However, this mount also serves as a crash bar or as some call it, a crash cage. The front crash bar does what it sounds like it should, it protects the front section of the bike in case of a crash or if the bike happens to fall over. The assembly in fact was designed and built for some local stunt riders to protect their bikes as they were learning new tricks and didn't want to destroy their new Sporty's in the process. The bar features replaceable delrin sliders on the ends to help the bike slide over the pavement as opposed to taking hold of the bike while it is sliding and causing it to highside. A lot of R&D has gone into the exact placement and length of the bar to ensure enough lean angle so not to impead other types of high speed cornering and still provide the right amount of protection. May not clear some factory pipes.  They are available with the California shaped side plates shown or also with a standard rounded side plate. Allow 1-2 weeks for delivery

 

  • Made of Mild Steel
  • Fully TIG welded for strength
  • Gloss Black powdercoat
  • Overall width of 31" (same as most handlebar widths with grips installed)
  • Sold as a bolt on kit
  • Replaceable Delrin slider ends