Highway Peg Crash Bar Dyna and FXR

Roll over to magnify and click to enlarge
  • dyna highway peg crash bar frame slider
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9

Product Reviews

Write Review

  1. Went Down on Freeway

    Posted by Kim on 31st Jul 2017

    I need to write about this product as I feel it saved my life. I went down on the freeway this weekend when I was cut off, and these bars stopped me from getting squished between the pavement and the engine. I skidded on the freeway bars and there was ZERO impact to my engine or tanks. I was able to pick my bike up and drive off the freeway. This product really needs to be promoted better for the other Dyna riders out there.

  2. Worth every penny

    Posted by Enrico Brown on 18th Feb 2017

    Like everyone else, I hope I never have to use it. Solid as fuck. Welds are beautiful. Easy install. Looks shit hot on the bike. Just couldnt go with a traditional engine guard or mustache bar. I think those kill the look of the bike. So nice to be able to stretch out on a longer ride. Will be ordering the rear bar soon. So glad to have another option. Totally going to recommend it to everyone.

  3. Dyna Highway Peg Crash Bar ROCKS!

    Posted by Marshall Thompson on 9th Feb 2017

    Bought this unit in 2014 FOR MY '14 Street Bob. Today had a tip-over on right side on hill with uneven pavement. Felt like a r*tard but the bike had almost zero damage! Big thank you to Bung King. This product is very well engineered and made, easy as pie to install. I hung a pair of LED lights on it.

  4. Can't wait to kick it over!

    Posted by Chris Bassett on 11th Jul 2016

    Just finished installing it (very easy install with hand tools). Like everything else I've purchased from BK fit and finish is stellar. I hope I don't need to use it, but sure am glad it is there if I do.

  5. saved my bike

    Posted by Anthony H on 9th Jun 2016

    Got in a back wreck and this bar saved thousands of dollars in damage. Bolts broke the way they were suppose to so my frame is not bent one bit. I will be ordering another one from you within the next month or so. Awesome product and very strong welds. I can send you a picture of the mangled bar to show how it held up and kept my cases from cracking

  6. Burly Crash Bar!!

    Posted by Overkill Phil on 15th Jul 2015

    This thing is beast, and fits my FXRP like a glove! Looks amazing!! All my buddies want one on their rides now.

  7. Bad Ass Product

    Posted by Christian on 2nd Jul 2015

    These bars are friggin' sweet! They are very well constructed and mount up really easy. I am a stickler for detail and BK has paid special attention to their craftsmanship. Thank you again, Bung King! Check em out on Instragram @worthycustoms

$299.00
Brand:
BUNGKING
SKU:
FCBD

Product Description

This is a dual function part for those of you that have a late or early Dyna with mid controls. The fully TIG welded assembly takes place of your bolt on highway pegs and serves the function as a standard highway peg would. However, this mount also serves as a crash bar or as some call it, a crash cage. The front crash bar does what it sounds like it should, it protects the front section of the bike in case of a crash or if the bike happens to fall over. The assembly in fact, was designed and built for some local stunt riders to protect their bikes as they were learning new tricks and didn't want to destroy their new Dyna's in the process. The bar features replaceable delrin sliders on the ends to help the bike slide over the pavement as opposed to taking hold of the bike while it is sliding and causing it to high-side. A lot of R and D has gone into the exact placement and length of the bar to ensure enough lean angle so not to impead other types of high speed cornering and still provide the right amount of protection. They are available with your choice of the California side plates shown or also with our Standard rounded side plates. Some models with the Speed Merchant skid plate may require the lengthening of regulator wires.  Allow 1-2 weeks for delivery.

 

  • Made of Mild Steel
  • Fully TIG welded for strength
  • Gloss Black powdercoat
  • Overall width of 32" (same as most handlebar widths with grips installed)
  • Sold as a bolt on kit
  • Replaceable Delrin slider ends